Position: Maintenance Technician/Millwright
Location: Monroe Township, New Jersey
Salary: $28-$35 /hr depends on exp
Shift: 1st Shift
Requirements:
Minimum 2 years experience as a Maintenance Technician/Millwright in an industrial environment
Must have own hand tools

Responsibilities:

• Performs repairs and preventive maintenance on all facility and production equipment with assistance.
• All work performed will be in accordance to GMPs.
• Troubleshoots and corrects all mechanical, electrical, hydraulic, and pneumatic malfunctions on production equipment.
• Set-up and assemble new equipment.
• Examines equipment to spot potential problems, leaks or malfunctions and reports them to the Maintenance Supervisor.
• Assembles, installs, and packs molds as assigned.
• Maintains machines, tools, and work area in a clean and safe orderly manner.
• Must perform all duties within established safety guidelines and procedures.
• Follow lock-out/tag-out procedures.
• Follow requirements established under Job Safety Analysis training.
• Other duties as assigned.

Qualifications:

Skills:

• Must have two (2) years experience as a mechanic in a similar environment.
• Must be able to use precision measuring equipment.
• Competent at reading and understanding most typical fluid power schematics.
• Competent at reading and understanding most typical circuit diagrams.
• Competent on tubing and piping jobs found in shop work or general repair and installations.
• Adequate knowledge of electrical systems to install and troubleshoot motor starters and other related items with limited supervision.
• Must be thoroughly knowledgeable in lubrication procedures.
• Must be able to cut and weld with accuracy.
• Must be able to use parts and machine manuals.
• Must have basic knowledge of all types of equipment on the job site.
• Competent to disassemble, inspect, measure and reassemble, test most valve and hydraulic cylinders.
• Desire to broaden skills needed to advance in the Maintenance department.
• Must possess a Berry forklift and be able to operate power industrial equipment (scissor-lift, forklift, hand-jack, etc.)

Education and/or Equivalent Experience:

• High school diploma or equivalent.
• Appropriate vocational training

Physical Requirements/Work Environment:

• Must be able to work nine (9) hours per day, five (5) days per week. Overtime may be necessary.
• Must provide own hand tools.
• Must work shift hours and days of the week as required.
• Must have a high degree of mobility, some repairs require awkward positions in order to access all areas of equipment (such as squatting and laying under machines). Must be able to climb a ladder.
• Must be able to comply with cGMP requirements hairnets, beard guards. No jewelry except for a plain band without stones.
• Noise level is 90dB.
• Polyethylene, polystyrene, PET, polypropylene, polyurethane, and purging compound materials are both processed and ground, which provides some fumes and dust.
• Must be able to wear protective clothing such as steel-toed shoes, earplugs, hard hat, and Arc Flash requirements.
• Will have exposure to high-pressure moving parts, shielded surfaces, which have elevated temperatures (350 600 degrees), high-pressure hydraulic systems, and high voltage and amperage systems.
• Must be able to lift 35 lbs. occasionally during the day.
• Must be able to stand approximately 8-12 hours a day.
• This position requires a high level of interaction with all personnel, which requires hearing skills. Must be able to interact with other employees.
• Maintenance personnel are part of the Plant Emergency Organization Team, which requires them to move quickly to shut-off main electric and gas service in the event of an emergency.